Fabio/Hauppauge_WinTV_dualHD_DVB
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
Hauppauge_WinTV_dualHD_DVB/README.md
Fabio 47de6bd822 Aggiorna README.md
2025-06-22 04:08:26 +08:00

3.3 KiB
Raw Blame History

Hauppauge WinTV-dualHD DVB

installare in debian 12

sudo cp dvb-demod-si2168-b40-01.fw  /lib/firmware

poi fare il reboot

per verificare sudo dmesg | egrep -i '(ivtv|tveeprom|tuner|dualhd|em28xx)'

risposta

[ 4.445216] usb 1-1.4: Product: dualHD [ 8.477194] em28xx 1-1.4:1.0: New device HCW dualHD @ 480 Mbps (2040:8265, interface 0, class 0) [ 8.477202] em28xx 1-1.4:1.0: DVB interface 0 found: bulk [ 8.533224] em28xx 1-1.4:1.0: chip ID is em28174 [ 9.720216] em28xx 1-1.4:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xebedc14c [ 9.720244] em28xx 1-1.4:1.0: EEPROM info: [ 9.720249] em28xx 1-1.4:1.0: microcode start address = 0x0004, boot configuration = 0x01 [ 9.726581] em28xx 1-1.4:1.0: AC97 audio (5 sample rates) [ 9.726600] em28xx 1-1.4:1.0: 500mA max power [ 9.726604] em28xx 1-1.4:1.0: Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e [ 9.783063] em28xx 1-1.4:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99) [ 9.789545] tveeprom: Hauppauge model 204209, rev C3I6, serial# 14342482 [ 9.789566] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 9.789571] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) [ 9.789576] tveeprom: audio processor is None (idx 0) [ 9.789580] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 9.789591] em28xx 1-1.4:1.0: We currently don't support analog TV or stream capture on dual tuners. [ 9.789597] em28xx 1-1.4:1.0: dvb set to bulk mode. [ 9.846783] em28xx 1-1.4:1.0: chip ID is em28174 [ 11.026637] em28xx 1-1.4:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xebedc14c [ 11.026672] em28xx 1-1.4:1.0: EEPROM info: [ 11.026679] em28xx 1-1.4:1.0: microcode start address = 0x0004, boot configuration = 0x01 [ 11.033200] em28xx 1-1.4:1.0: AC97 audio (5 sample rates) [ 11.033228] em28xx 1-1.4:1.0: 500mA max power [ 11.033234] em28xx 1-1.4:1.0: Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e [ 11.089811] em28xx 1-1.4:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99) [ 11.099093] tveeprom: Hauppauge model 204209, rev C3I6, serial# 14342482 [ 11.099122] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 11.099128] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) [ 11.099136] tveeprom: audio processor is None (idx 0) [ 11.099141] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 11.099158] em28xx 1-1.4:1.0: dvb ts2 set to bulk mode. [ 11.300610] usbcore: registered new interface driver em28xx [ 11.314799] em28xx 1-1.4:1.0: Binding DVB extension [ 11.331341] em28xx 1-1.4:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 11.332559] em28xx 1-1.4:1.0: DVB extension successfully initialized [ 11.332580] em28xx 1-1.4:1.0: Binding DVB extension [ 11.346505] em28xx 1-1.4:1.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [ 11.350233] em28xx 1-1.4:1.0: DVB extension successfully initialized [ 11.350249] em28xx: Registered (Em28xx dvb Extension) extension [ 34.250054] em28xx 1-1.4:1.0: DVB: adapter 1 frontend 0 frequency 0 out of range (48000000..870000000) [ 34.541922] em28xx 1-1.4:1.0: DVB: adapter 0 frontend 0 frequency 0 out of range (48000000..870000000)

sudo lsusb -v -d 2040:8265