Sync

Sync

.github/workflows/check.yml

@@ -11,4 +11,4 @@ jobs:
       - name: Run ShellCheck
         uses: ludeeus/action-shellcheck@master
 env:
-        SHELLCHECK_OPTS: -x -e SC2002 -e SC2223 -e SC2034 -e SC2064 
+        SHELLCHECK_OPTS: -x -e SC2001 -e SC2002 -e SC2223 -e SC2034 -e SC2064 

Dockerfile

@@ -7,7 +7,6 @@ RUN apt-get update && apt-get -y upgrade && \
 	iproute2 \
 	dnsmasq \
 	net-tools \
-	bridge-utils \
 	ca-certificates \
 	isc-dhcp-client \
 	netcat-openbsd \
@@ -21,7 +20,6 @@ VOLUME /storage
 
 EXPOSE 22
 
-ENV ALLOCATE "Y"
 ENV CPU_CORES "1"
 ENV DISK_SIZE "16G"
 ENV RAM_SIZE "512M"

run/disk.sh

@@ -24,6 +24,7 @@ if [ -f "${DATA}" ]; then
 
     if [ "$ALLOCATE" = "N" ]; then
 
+      # Resize file by changing its length
       truncate -s "${DATA_SIZE}" "${DATA}"; 
 
     else
@@ -38,6 +39,7 @@ if [ -f "${DATA}" ]; then
         echo "ERROR: Specify a smaller size or disable preallocation with ALLOCATE=N." && exit 84
       fi
 
+      # Resize file by allocating more space
       if ! fallocate -l "${DATA_SIZE}" "${DATA}"; then
         echo "ERROR: Could not allocate a file for the data disk." && exit 85
       fi
@@ -65,10 +67,9 @@ fi
 
 if [ ! -f "${DATA}" ]; then
 
-  # Create an empty file
-
   if [ "$ALLOCATE" = "N" ]; then
 
+    # Create an empty file
     truncate -s "${DATA_SIZE}" "${DATA}"
 
   else
@@ -81,6 +82,7 @@ if [ ! -f "${DATA}" ]; then
       echo "ERROR: Specify a smaller size or disable preallocation with ALLOCATE=N." && exit 86
     fi
 
+    # Create an empty file
     if ! fallocate -l "${DATA_SIZE}" "${DATA}"; then
       rm -f "${DATA}"
       echo "ERROR: Could not allocate a file for the data disk." && exit 87

run/network.sh

@@ -26,7 +26,6 @@ configureDHCP() {
   IP=$(ip address show dev "${VM_NET_DEV}" | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/)
 
   ip l add link "${VM_NET_DEV}" "${VM_NET_VLAN}" type macvlan mode bridge
-
   ip address add "${IP}" dev "${VM_NET_VLAN}"
   ip link set dev "${VM_NET_VLAN}" up
 
@@ -54,17 +53,6 @@ configureDHCP() {
 
   ip a flush "${VM_NET_TAP}"
 
-  # Create /dev/vhost-net
-  if [ ! -c /dev/vhost-net ]; then
-    mknod /dev/vhost-net c 10 238
-    chmod 660 /dev/vhost-net
-  fi
-
-  if [ ! -c /dev/vhost-net ]; then
-    echo -n "Error: VHOST interface not available. Please add the following "
-    echo "docker variable to your container: --device=/dev/vhost-net" && exit 85
-  fi
-
   TAP_NR=$(</sys/class/net/"${VM_NET_TAP}"/ifindex)
   TAP_PATH="/dev/tap${TAP_NR}"
 
@@ -88,6 +76,12 @@ configureDHCP() {
     echo "--device=/dev/vhost-net --device-cgroup-rule='c ${MAJOR}:* rwm'" && exit 21
   fi
 
+  # Create /dev/vhost-net
+  if [ ! -c /dev/vhost-net ]; then
+    mknod /dev/vhost-net c 10 238
+    chmod 660 /dev/vhost-net
+  fi
+
   if ! exec 40>>/dev/vhost-net; then
     echo -n "ERROR: VHOST can not be found. Please add the following docker "
     echo "variable to your container: --device=/dev/vhost-net" && exit 22
@@ -101,22 +95,24 @@ configureNAT () {
   VM_NET_IP='20.20.20.21'
 
   #Create bridge with static IP for the VM guest
-  brctl addbr dockerbridge
+  ip link add dev dockerbridge type bridge
   ip addr add ${VM_NET_IP%.*}.1/24 broadcast ${VM_NET_IP%.*}.255 dev dockerbridge
   ip link set dockerbridge up
 
   #QEMU Works with taps, set tap to the bridge created
   ip tuntap add dev "${VM_NET_TAP}" mode tap
   ip link set "${VM_NET_TAP}" up promisc on
-  brctl addif dockerbridge "${VM_NET_TAP}"
+  ip link set dev "${VM_NET_TAP}" master dockerbridge
 
   #Add internet connection to the VM
   iptables -t nat -A POSTROUTING -o "${VM_NET_DEV}" -j MASQUERADE
   iptables -t nat -A PREROUTING -i "${VM_NET_DEV}" -p tcp  -j DNAT --to $VM_NET_IP
   iptables -t nat -A PREROUTING -i "${VM_NET_DEV}" -p udp  -j DNAT --to $VM_NET_IP
 
-  # Hack for guest VMs complaining about "bad udp checksums in 5 packets"
+  if (( KERNEL > 4 )); then
-  iptables -A POSTROUTING -t mangle -p udp --dport bootpc -j CHECKSUM --checksum-fill || true
+    # Hack for guest VMs complaining about "bad udp checksums in 5 packets"
+    iptables -A POSTROUTING -t mangle -p udp --dport bootpc -j CHECKSUM --checksum-fill || true
+  fi
 
   #Enable port forwarding flag
   [[ $(< /proc/sys/net/ipv4/ip_forward) -eq 0 ]] && sysctl -w net.ipv4.ip_forward=1
@@ -131,11 +127,17 @@ configureNAT () {
   NET_OPTS="-netdev tap,ifname=${VM_NET_TAP},script=no,downscript=no,id=hostnet0"
 
   # Build DNS options from container /etc/resolv.conf
-  mapfile -t nameservers < <(grep '^nameserver' /etc/resolv.conf | sed 's/nameserver //')
+
-  searchdomains=$(grep '^search' /etc/resolv.conf | sed 's/search //' | sed 's/ /,/g')
+  if [ "$DEBUG" = "Y" ]; then
+    echo "/etc/resolv.conf:" && echo && cat /etc/resolv.conf && echo
+  fi
+
+  mapfile -t nameservers < <(grep '^nameserver' /etc/resolv.conf | sed 's/\t/ /g' | sed 's/nameserver //' | sed 's/ //g')
+  searchdomains=$(grep '^search' /etc/resolv.conf | sed 's/\t/ /g' | sed 's/search //' | sed 's/#.*//' | sed 's/\s*$//g' | sed 's/ /,/g')
   domainname=$(echo "$searchdomains" | awk -F"," '{print $1}')
 
   for nameserver in "${nameservers[@]}"; do
+    nameserver=$(echo "$nameserver" | sed 's/#.*//' )
     if ! [[ "$nameserver" =~ .*:.* ]]; then
       [[ -z "$DNS_SERVERS" ]] && DNS_SERVERS="$nameserver" || DNS_SERVERS="$DNS_SERVERS,$nameserver"
     fi
@@ -151,7 +153,8 @@ configureNAT () {
     [[ -z $(hostname -d) ]] || DNSMASQ_OPTS="$DNSMASQ_OPTS --dhcp-option=option:domain-name,$(hostname -d)"
   fi
 
-  [ "$DEBUG" = "Y" ] && echo && echo "$DNSMASQ $DNSMASQ_OPTS"
+  DNSMASQ_OPTS=$(echo "$DNSMASQ_OPTS" | sed 's/\t/ /g' | tr -s ' ' | sed 's/^ *//')
+  [ "$DEBUG" = "Y" ] && echo "$DNSMASQ $DNSMASQ_OPTS" && echo
 
   $DNSMASQ ${DNSMASQ_OPTS:+ $DNSMASQ_OPTS}
 }
@@ -177,7 +180,7 @@ GATEWAY=$(ip r | grep default | awk '{print $3}')
 if [ "$DEBUG" = "Y" ]; then
 
   IP=$(ip address show dev "${VM_NET_DEV}" | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/)
-  echo "Info: Container IP is ${IP} with gateway ${GATEWAY}"
+  echo "Info: Container IP is ${IP} with gateway ${GATEWAY}" && echo
 
 fi
 

run/run.sh

@@ -3,8 +3,8 @@ set -eu
 
 # Docker environment variabeles
 
-: ${BOOT:=''}.                  # URL of the ISO file
+: ${BOOT:=''}                   # URL of the ISO file
-: ${DEBUG:=''}.               # Enable debug mode
+: ${DEBUG:='N'}             # Enable debug mode
 : ${ALLOCATE:='Y'}       # Preallocate diskspace
 : ${CPU_CORES:='1'}     # Amount of CPU cores
 : ${DISK_SIZE:='16G'}    # Initial data disk size
@@ -13,6 +13,8 @@ set -eu
 echo "Starting QEMU for Docker v${VERSION}..."
 
 STORAGE="/storage"
+KERNEL=$(uname -r | cut -b 1)
+
 [ ! -d "$STORAGE" ] && echo "Storage folder (${STORAGE}) not found!" && exit 69
 [ ! -f "/run/run.sh" ] && echo "Script must run inside Docker container!" && exit 60
 
@@ -48,7 +50,14 @@ RAM_OPTS=$(echo "-m ${RAM_SIZE}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
 CPU_OPTS="-smp ${CPU_CORES},sockets=1,cores=${CPU_CORES},threads=1"
 SERIAL_OPTS="-serial mon:stdio -device virtio-serial-pci,id=virtio-serial0,bus=pcie.0,addr=0x3"
 EXTRA_OPTS="-device virtio-balloon-pci,id=balloon0 -object rng-random,id=rng0,filename=/dev/urandom -device virtio-rng-pci,rng=rng0"
+
 ARGS="${DEF_OPTS} ${CPU_OPTS} ${RAM_OPTS} ${KVM_OPTS} ${MON_OPTS} ${SERIAL_OPTS} ${NET_OPTS} ${DISK_OPTS} ${EXTRA_OPTS}"
+ARGS=$(echo "$ARGS" | sed 's/\t/ /g' | tr -s ' ')
+
+if [ "$DEBUG" = "Y" ]; then
+  echo -n "qemu-system-x86_64 "
+  echo "${ARGS}" && echo
+fi
 
 set -m
 (
@@ -56,4 +65,8 @@ set -m
 )
 set +m
 
-pidwait -F "${_QEMU_PID}" & wait $!
+if (( KERNEL > 4 )); then
+  pidwait -F "${_QEMU_PID}" & wait $!
+else
+  tail --pid "$(cat ${_QEMU_PID})" --follow /dev/null & wait $!
+fi