Split off parsing-related components from extractor into a new parsing
module.
A lot of these methods are used in non-extractor code, so it makes more
sense for them to not be part of the extractors.
The code that is really extractor-specific can remain within the
extractor files.
Update transitions in the home fragment to X-axis.
I noticed a visual issue in the detail transition in the existing
version stemming from how the main fragment's drawing is clipped by
the bottom sheet, resulting in a less-than-ideal Z-axis transition.
While I wanted to fix this by attempting to switch to inset based
bottom sheet management, I still need to wait for more changes in
order to successfully pull that off, and hence I'll be reverting it
soon.
Moving these transitions to X-axis prevents this visual issue while
still being roughly semantically similar.
Remove EdgeCoordinatorLayout in favor of using fitsSystemWindows when
needed.
EdgeCoordinatorLayout was derived from a misunderstanding about how
window insets worked. Remove it.
Completely rework Auxio's iconography based on the new material symbols
icon set.
This does the following:
1. Switches the sharp + filled icon style to an outlined + round icon
style.
2. Removes 32dp icons from everywhere except the playback panel.
This does not:
1. Actually handle optical sizes right. This is going to take some more
work to make it harmonious with the current UI.
2. Update margins in some places to be harmonious with the new icons.
This is also going to take some more work to do properly.
Fix an issue where the collapsing toolbar would not preserve it's state
when navigating.
Apparently you need to add an ID to a view to get it's state to be
restored. There is no warning for this at all. Android, everyone.
Completely rework the way Auxio handles icons.
This is mostly two changes:
1. Removing ImageButton/StyledImageButton for MaterialButton. This is
done by abusing MaterialButton's theming options to make it only show
an icon.
2. Standardizing icon sizes into small, medium, and large categories.
Small is the default, Medium and Large are for edge-cases like the
playback icons which look horrible at 24dp.
3. Abusing the Toolbar to make it follow Material 3 guidelines. This
mostly involved removing the strange icon sizing and correctly padding
the view.
4. Reworking the playback bar to use more, smaller icons, making it
more like a Toolbar in the process (which I like).
Create a ViewModel for the more complicated navigation pathways.
Normally, navigation was fragmented along a complicated stretch of
fragment hacks and DetailViewModel's navToItem attitbute, both of which
were not really that ideal. Dumpster them for a single, unified
viewmodel for the more complicated navigation situations. This removes
much of the duplicate navigation logic and is likely much more
maintainable for future situations.
Rework the style of all album covers in the app to be more in line with
the new track number style.
This is mostly comprised of adding a new background to all cover views
and rescaling error icons to be smaller than they would normally be.
This also includes a change in the cover/track background color from
colorSurfaceVariant to colorOnSurfaceInverse, which seems to provide
the best visibility in all cases.
These changes also apply to the track number views.
Remove databinding entirely.
Databinding was a terrible idea for Auxio. I rarely leveraged it, and
when I did, it produced messy code and bloated build times. Dumpster it
for just viewbinding, which is good. This reduces building times by
nearly 2/3, and generally makes the codebase more coherent and usable.
Remove the elevation component from all toolbars and the bottom bar.
Material3 states that top and bottom app bars should not cast a drop
shadow. Auxio ignored this and used one anyway. This largely stemmed
from incorrect use of the AppBarLayout styles, which were mostly just
incorrect M2 styles with a new background plastered over. Fix this
by creating a new style that inherits the proper M3 styles and then
using that on all AppBarLayout instances in the app.
Apply body typography in new places in the app.
For awhile, Body and Title typography were used interchangeably, as
they occupy the same text size range. This commit defines the Body
text as to be used for one-line widgets or tertiary widgets, while
the Title text is defined to be used for multi-line or heading widgets.
Recreate all accents AGAIN. This time it's to properly generate secondary
and tertiary colors for these. The results of them vary [some might be
removed since they're too similar to other accents now], but most are
fine and they allow me to properly use these components without inane
bugs.
Use Slider and FloatingActionbutton in the playback view. This is not
because I wanted to, but because there were insane bugs on Lollipop
devices that stemmed from them being unable to load complex selector
resources.
Migrate to 100% Material3 text styling. I had to basically ignore the
intended styling here just to get a sensible design here, which is
"bad" but I do what I want. The only usage of MaterialComponents left
in the project now is the dialog since the new dialog style the worst
thing ever.
Use Material typography everywhere instead of using a mix of AppCompat
and Material styles. This is still based around MaterialComponents
though, as I'm not fully sure how to wield the new Material3 text
styles yet. This also completely phases out inter bold.
Add edge-to-edge on the Home, Detail, and Search fragments. This
solution is not ideal at all, relying on viewModel state to make
sure that the padding is only applied when the playback bar is not
present. However, it works. I'll likely replace it with a better
layout once I can figure out how similar layouts like Material
Files' PersistentBarLyout work.
Finally add tab customization. This implementation is a
bit ugly, but I had to futureproof it for playlists and I'm
planning to clean up a lot of the duplicate code across the app.
This addition notably allows a default tab to be set, which is
something that was widely requested in #12. This UI rework finally
allows it to be added.
Mostly migrate to Material 3/Material You.
- Auxio should now follow dynamic colors on Android 12
- Accents have been regenerated to align with the new color roles
- Some colors have been tweaked here and there to line up with the
new design system
- Dialogs were not fully migrated, but that's because Material3 dialogs
look god-awful.
- Accent class was reworked to take up less memory
Now that this is out of the way, I can focus on other UI things before
the release of 2.0.0.
Refactor the styling again to make all styles start with the Auxio
prefix. Also try to phase out the usage of layout_width and
layout_height in most places, since those can cause a lot of
frustration if they aren't used in the layout they are expected in.
Drop the Bridge theme and completely migrate to material. This is for
two reasons:
- To make Material You less painful
- Improve coloring [Dark mode, other colors, etc].
Most of the previous UI elements were kept [no rounded corners], but
did come at the cost of removing the hint tagline from the search bar
since there was simply no good way to integrate it. There are also
some other miscellanious issues [Weird selection menus, dividers are
not migrated still], but those will be fixed in future commits.
Make HomeFragment's AppBarLayout lift when the data scrolls. This
was something I wanted to do initially, but kept running into issues
with. Turns out the addition of my custom AppBarLayout made this pretty
trivial all things considered. The entire app now follows this idiom.
Use colorOnSurface for the first time ever. I decided to pick a color
that was as non-intrusive as possible that was still differentiateable,
and I think it looks like a net improvement. It will probably be
tweaked a bit in the future as I expand it to other elevated views.
Make playback/about UIs follow the new liftOnScroll and edge-to-edge
idioms. This finally allows me to collapse a lot of duplicate code
into MainActivity and in general reduce code mess.
Make a hack layout that fixes the problem of the lift state not
actually following the RecyclerView state. This should remove the
need for all the fragile fixes for this UI idiom.
Improve the search UI by making it edge-to-edge and adding the
liftOnScroll idiom. It does come with the caveat of walking on
eggshells to get the liftOnScroll code working, but its okay. It
may be improved in the future.
Merge LibraryFragment, SongsFragment, and others into a new fragment
called HomeFragment. This is the beginning of the Auxio UI overhaul.
This has caused some regressions here and there, but these will be
rectified over time.
Refactor styles again, this time trying to seperate the more
layout-specific attributes so that layouts become more re-usable.
This also updates the naming conventions of styles.
Instead of using @color/background directly, use ?attr/colorSurface
so that changes can be made to the theming easier. This also
resolves some more minor issues regarding certain widget's
backgrounds.
